Error Messages - Modster 200 Charger Duo Benutzerhandbuch

Manual

8. Error Messages

The charger can display error messages when certain types of problems are detected. In any case when an error occurs, check the connec-
tions, power supply, battery and settings.
This indicates that there is a polarity reversal. Check the battery and connections.
This indicates that the connection between the charger and battery was interrupted while the battery was charging or discharging. Check the
battery and connections.
This indicates that there is an electrical short-circuit on the charger output. Check the battery and connections.
This indicates that there is a problem with the power supply. Check the power supply.
This indicates a charger failure. Stop using the charger and seek assistance.
This indicates that the battery voltage is too low. Check the battery and settings.
This indicates that the battery voltage is too high. Check the battery and settings.
This indicates that one or more cells of the battery have a too low voltage. Check the battery and connections.
This indicates that one or more cells of the battery have a too high voltage. Check the battery and connections.
This indicates a problem with the balancing connector. Check the battery and connections.
This indicates that the charger is overheating. Let the charger cool down or improve the cooling.
This indicates a charger failure. Stop using the charger and seek assistance.
www.modster.at
MODSTER 200 Charger Duo
29