Modster 200 Charger Duo Benutzerhandbuch Seite 27

Manual
8.3 Lead Batteries
In the program select menue on the screen, use the STOP key to select Acid Lead (Pb) battery type and then press the START key.
By pressing the arrow keys, you can select the different function modes:
Pb CHARGE: Normal charge
Modifying the settings:
To modify the charge settings, press the START key so that the charge/discharge current or battery voltage (cell count) setting blinks.
Use the arrow keys to increase or decrease the charge or discharge current or the cell count ( 2V to 20V – 1P to 10P).
Launching the charge or discharge:
Once you are ready to start the charge or discharge, press and hold the START key for 3 seconds.
CHG: normal charge mode
DSC: discharge mode
While the charger is charging or discharging the battery, you can modify the actual charge and discharge current by pressing the START key
and using the arrow keys. Then press the START key again.
You can use the arrow keys to change the information displayed the screen.
Once the charger has determined that the charge or discharge is complete, the charger stops and the FULL or END message is displayed.
8.4 Power Supply Function
This feature allows the use of the charger as a power supply, for example for the use of electric blankets.
Power range:
Voltage: 3-24V
Current: 0.1A-6,0A
www.modster.at
Pb DISCHARGE: Discharge the battery
MODSTER 200 Charger Duo
27