Herunterladen Inhalt Inhalt Diese Seite drucken

Declaration Of Conformity - ThermoFlow Hydrex 18kW Montage- Und Betriebsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DE
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Children shall not play with the appliance. Cleaning and user mainte-
nance shall not be made by children without supervision.

Declaration of conformity

NEG-Novex GmbH hereby declares that the Thermoflow device complies with the direc-
tives and standards:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
2011/65/EC (RoHS II)
2009/125/EC Ecodesign
(EC) No. 814/2013
And also comply with the provisions of the following European Standards:
EN 62233:2008 + C1:2008
EN 50581:2012
EN 61000-6-1:2007
EN 61000-6-3:2007
EN 60335-1:2012 + AII:2014
EN 60335-2-35:2002 + C11:2006 + A1:2007 + A2:2011
22-07-2016
NEG-Novex Großhandelsgesellschaft für Elektro- und Haustechnik GmbH
Chenover Str. 5, D-67117 Limburgerhof
Standards and regulations
The installation (plumbing and electrical work), commissioning and
maintenance of this appliance should only be undertaken by person-
nel with electrical engineering qualifications and in accordance with
the relevant standards and regulations (BSI, etc.) and this manual.
Correct and reliable operation of this unit will only be ensured if the original accessories and
spare parts are used. The following should be observed:
DIN VDE 0100: Requirements of your electricity supplier.
DIN 1988 / DIN 4109: Requirements of your water supplier.
The following should also be observed:
the appliance name plate;
the technical specifications.
Connection to the water supply
Compatible cold water pipe materials: steel, copper and plastic.
Operating conditions to DIN 1988, Part 2, December 1988, Section 2.2.3, Table 1. There is
no need to install a relief valve. Compatible hot water pipe materials: copper, approved plastic
piping systems. During normal operations and fault conditions, the operating conditions to
DIN 1988, Part 2, December 1988, Section 2.2.3, Table 1 apply.
This device should be permanently connected to the water mains and cannot be connected
by a hose-set.
GB
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis