Sound Control; Color Setting; Endless Loop Rgby „Sc" And Speed Setting; Endless Loop Rgby „Fc" And Speed Setting - EuroLite LED KRF-144 4-Channel Light Bar Bedienungsanleitung

Sound Control

SOUR:
after 5 seconds without music, the LEDs switch off
Press the MODE and then the UP button until the display shows SOUR. Please press the ENTER button to
confirm and to return to the main menu.
SOUF:
LEDs stay lit despite music stop
Press the MODE and then the UP button until the display shows SOUF. Please press the ENTER button to
confirm and to return to the main menu.

Color Setting

Red: rl--, Green: gl--, Blue: bl--, Yellow: Ul--
Press the MODE and then the UP button until the display shows rl- . Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired brightness. Brightness from rl00 to rl12,
increasing.
Please press the ENTER button to confirm and to return to the main menu.
Press the MODE and then the UP button until the display shows gl- . Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired brightness. Brightness from gl00 to gl12,
increasing.
Please press the ENTER button to confirm and to return to the main menu.
Press the MODE and then the UP button until the display shows bl- . Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired brightness. Brightness from bl00 to bl12,
increasing.
Please press the ENTER button to confirm and to return to the main menu.
Press the MODE and then the UP button until the display shows Ul- . Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired brightness. Brightness from Ul00 to Ul12,
increasing.
Please press the ENTER button to confirm and to return to the main menu.
Endless Loop RGBY „SC" and Speed Setting
SC = Switching Colors
Press the MODE and then the UP button until the display shows FlAS. Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired speed. Speed from Fl00 to Fl12, increasing.
Please press the ENTER button to confirm and to return to the main menu.
Endless Loop RGBY „FC" and Speed Setting
FC = Fading Colors
Press the MODE and then the UP button until the display shows FADE. Press the ENTER button.
Via the UP or DOWN buttons, you can select the desired speed. Speed from FA00 to FA12, increasing.
Please press the ENTER button to confirm and to return to the main menu.
15/16 00077381.DOC, Version 1.0