Connecting And Charging - Oral-B Trizone 5000 Bedienungsanleitung

e Charge indicator light
f Low charge indicator light
g Charging unit (basic charger and brush head compartment with
protective cover)
h SmartGuide
i SmartGuide holder
j Wall mount
k Adhesive ring
Specification
For voltage specifications refer to the bottom of the charging unit.

Connecting and charging

Your toothbrush has a waterproof handle, is electrically safe and designed
for use in the bathroom.
• Plug the charger (g) into an electrical outlet and place the toothbrush
handle (d) on the charging unit.
• The green charge indicator light (e) flashes while the handle is being
charged. Once it is fully charged, the light turns off. A full charge can take
up to 22 hours and enables up to seven days of regular brushing (twice a
day, 2 minutes) (picture 1).
Note: After deep discharge, the charge indicator light might not flash
immediately; it can take up to 10–15 minutes.
• If the rechargeable battery is low the red charge indicator light (f) is
flashing for some seconds when turning your toothbrush on/off.
• For everyday use, the toothbrush handle can be stored on the charging
unit to maintain it at full power. Overcharging is impossible.
• To maintain the maximum capacity of the rechargeable battery, unplug
the charging unit and fully discharge the handle with regular use at least
every 6 months.
SmartGuide adjustments
The SmartGuide (h) comes with a demonstration mode. Deactivate this mode
by removing the compartment cover in the back (picture A) and push the
«set» or «h/min» button. A flashing «12:00» indicates that you can now adjust
the clock time.
Note: If the SmartGuide display is blank before first use (no active demon-
stration mode/no batteries inserted) the batteries will need to be replaced/
inserted before continuing. Batteries are supplied.
20