Fixing Problems; Warranty - Wolf Garten HS 50 E Originalbetriebsanleitung

Fixing problems

Problem Possible cause
• Blunt blade.
Blade gets hot.
• Too much friction due to inadequate lubri-
• Not connected to voltage supply
• Cable damage:
1
Motor does not
run.
Jittery operation, • Blade damaged
heavy vibration of
• Blade not firmly in stabilizer.
the device
When in doubt, always seek out a WOLF-Garten Service location.
1
Put down the hedge shears and pull out the power plug before performing any checks or work
on the blades.

Warranty

The warranty rules issued by our company or the impor-
ter apply to every country. As part of the warranty, we re-
medy malfunctions on your appliance free of charge
provided that this malfunction is caused by a material or
manufacturing defect. In the event of a warranty claim,
please turn to your dealer or the nearest branch office.
16
cation
Attention! Electric shock through
cable damage
When the cable is cut through or
damaged, the safety fuse does not
always trip.
• Do not touch cable before pulling
out the power plug out of the so-
cket.
Solution
• Go to a WOLF-Garten Service location.
• Oil blades
• Check the power supply and have electri-
cian perform repairs if necessary.
• Have damaged cable completely repla-
ced at WOLF-Garten Service location.
Patching the cable with insulating tape is
forbidden.
• Go to WOLF-Garten Service location.
• Go to WOLF-Garten Service location.
en