General Notes - Scheppach biostar 2000 Originalanleitung

Manufacturer:
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working expe-
rience with your new machine.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and
the VDE 0100, DIN 57113 / VDE 0113 regulations
Recommendations:
Read the entire text of the operating instructions prior
to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti-
lize its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable reg-
ulations of your country with respect to the operation
of the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of wood working machines must be
observed.
14 english

General Notes

• When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately. Com-
plaints received at a later date will not be acknow-
ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself
familiar with the device prior to using it.
• Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail-
able from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
biostar 2000
Delivery
Technical Data
Dimensions L x W x
H mm
Input height mm
Output height mm
Infeed opening max.
mm
Outfeed opening max.
mm
Wheel ø mm
Weight kg
Power
Branch thickness
max ø mm
Min. shredding of
branches kg/h
Min. shredding of large
branches kg/h
Shredding tools
Blade disc ø mm
Saw blade mm
Infeed worm ø mm
Drive
Motor V/Hz
Consumption power
P1 W
Output power P2 W
Revolutions 1/min
Operating mode
Splashproof
System fuse protection
Subject to technical changes!
Noise Information
Typically the A-weighted noise levels of the product
are: Sound pressure level 83 dB (A);
Sound power level 94 dB (A).
Sound emission values determined according to EN
ISO 3744:2010, EN11201:2010
The protective cover is installed
with a blade disc and an elec-
tronic unit
Frame spar
Wheels and axle
Filling hopper
Installation tools enclosed
in a tool bag
Operation instructions
570 x 370 x 920
920
330
40 x 140
45 x 230
150
25,0
30
70
90
220
4 x 30 x 82
60
230/50
1800
1200
2830
S6/25 %
IP 20
Träge D Typ, 10 Amp.