Control Panel - Electrolux ESF 43020 Benutzerinformation

22 electrolux
9 Upper spray arm

CONTROL PANEL

1
1 Programme guide
2 On/off indicator
3 Programme marker
4 Indicators
5 Delay start button
6 Start/cancel button
7 Programme knob
Washing phase indicator. It comes on when the washing phase or the rinsing
phases operate.
Drying phase indicator. It comes on when the drying phase operates.
End indicator. It comes on in these conditions:
• When the washing programme is completed.
• When you adjust the level of the water softener.
• When there is a malfunction of the appliance.
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
Programme guide
This guide helps you in the selection of the
washing programme.
Programme knob and on/off indicator
To activate the appliance and set a
washing programme
• Align the programme marker that is on
the knob with a washing programme. Re-
fer to 'Washing programmes'. The on/off
indicator comes on.
Indicator lights
1)
10 Worktop
2
7
To deactivate the appliance
• Align the programme marker with the on/
off indicator. The on/off indicator goes
off.
Delay start button
Press this button to delay the start of the
washing programme of three hours. Refer
to 'Select and start a washing programme'.
Start/cancel button
Use this button for these operations:
3
6 5 4