Inhaltsverzeichnis
Werbung
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Possible cause
The bulb is defective. Fig. 8/A
Light does not function
Light switch is sticking.
Fig. 8/B
Displays do not illuminate.
Power failure!
S The fuse has tripped.
S The mains plug has not been
E2" is displayed,
Electronics module defective
Fig. 2/1.
Remedial action
Replace defective bulb.
1. Pull out the mains plug or
2. Remove cover forwards.
3. Change the bulb
Check whether it can be moved.
If not, please call customer service.
Check whether the power is on,
the fuse must be switched on.
inserted properly.
Call customer service
en
disconnect the fuse.
(replacement bulb max. 15 W,
220 240 V a.c., E14 lampholder)
27
Werbung
Inhaltsverzeichnis
