Inhaltsverzeichnis
Werbung
7. After brewing, remove the filter
GB
holder. Twist it to the left and take it
out of the retainer. Fold finger pro-
tector forwards and remove used
coffee grounds from the filter. Then
take it out of the holder and clean it
with water. Dry with a cloth before
putting it back into the filter box.
3. Place a bowl under the steam
nozzle and turn the selector dial
back to
for a few seconds. This
will remove any residue of hot
water/milk from the steam nozzle.
Caution: the steam pipe is hot!
Allow to cool down, then clean the
steam pipe with a cloth.
18
Additional features
1. Steam can be used to froth milk or
to heat liquids. Push the steam but-
ton and wait for the steam tempera-
ture indicator light to stop flashing
and go to constant light. Immerse
the steam nozzle in a heatproof con-
tainer with milk.
4. To make coffee again, press the
steam button once more (the light
will turn off ) and then turn the se-
lector to
.
2. Start the steam by turning the se-
lector dial to . Move the container
in circular movements, the nozzle
should not touch the bottom. To
stop the steam, turn the selector dial
to
when you have reached the
desired amount of froth.
5. For hot water, place a cup under
the steam nozzle and turn the se-
lector dial to
. Hot water comes
out of the nozzle. Turn the dial back
to
to stop the water.
Werbung
Inhaltsverzeichnis
Fehlerbehebung
