Setting The Correct Time - Candy 2D 964 X Bedienungsanleitung

USE OF CLOCK/PROGRAMMER

SETTING THE CORRECT TIME

To set the correct time push and turn anti-clockwise the knob
until the clock shows the correct time. Once this is done
release the control.
FUNCTION HOW TO ACTIVATE IT HOW TO SWITCH IT OFF
• Turn the control knob anti-
MANUAL
clockwise, without pushing,
FUNCTION
until the symbol
in the window (A)
• First of all select the
cooking function and the
temperature required
• Set the length of cooking
required by turning the
control knob anticlockwise
COOKING
until the time matches the
TIME
length of time shown in the
(To be used even for
window (A)
the pyrolysis cycle)
• The oven will start
immediately and it will
switch off automatically at
the end of the preset time
• Max time 180 minutes
(3 hours)
Window A
• Turn the oven function
selector to position O.
appears
• At the end of the set time
the oven switches off
automatically, this is
indicated by an audible
alarm.
• To cancel the setting turn
the control knob until the
symbol
window (A)
ATTENTION : the oven only operates if set on manual function
or preset time.
WHAT IT DOES
• Enables you to operate
the oven.
• It allows you to preset the
cooking time required for
the recipe chosen.
appears in the
11 GB
WHAT IT IS FOR
• For cooking the desired
recipes
• At the end of the cooking
time set, the oven will
switch off automatically
and an audible alarm will
ring. To cancel it turn the
control knob until the
symbol appears in the
window (A)