JVC KD-AVX44 Bedienungsanleitung Seite 61

Menu items
Illumination
Initialize
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [52]
1
* Depends on the amplifier gain control. (☞ page 60)
2
* Selectable only when a DAB tuner is connected.
3
* Not selectable when "AV Input" is selected as the source.
The REVERSE GEAR SIGNAL lead connection is required ☞ "Installation/Connection Manual." The rear view through
4
*
the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
5
* Not selectable when the component connected to the CD changer jack is selected as the source.
6
* The name of the component detected through the CD changer jack is shown.
The TEL MUTING lead connection is required. ☞ "Installation/Connection Manual."
7
*
Selectable settings, [reference page]
You can turn off the touch pad controls and monitor lights while turning
on the unit. ☞ [5]
Normal: Always lights.
Proximity/Motion: Lights up when your hand
moves close to the controls.
Proxi/Motion-LCD: Light up when your hand moves close to the
controls.
Touch Pad: Lights up when your finger
touches the controls.
Touch Pad-LCD: Light up when your finger touches the controls.
Initialize all settings you have made in
reset the unit. ☞ [3]
59
Touch pad controls
Always lights.
Always lights.
Menu>. Hold 6, then
<AV
Monitor
SETTINGS