Philips GC4400 series Bedienungsanleitung Seite 10

EnGlish
10
Fabric type
Silk
Synthetic
fabrics (e.g.
acrylic, nylon,
polyamide,
polyester)
Temperature
setting
1
1
1 Specific types only: remove the heat-resistant
protective cover.
Do not leave the heat-resistant protective cover
on the soleplate during ironing.
2 Put the iron on its heel.
3 To set the required ironing temperature,
turn the temperature dial to the appropriate
position (see the 'Temperature and steam
settings' table above).
Check the laundry care label for the fabric type.
If you do not know what kind or kinds of fabric
an article is made of, determine the right ironing
temperature by ironing a part that is not visible
when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse
side of the fabric to prevent shiny patches. To
prevent stains, do not use the spray function.
Start ironing the articles that require the lowest
ironing temperature, such as those made of synthetic
fibres.
Steam Steam
setting boost
0 N.A.
0 N.A.
Ionic
DeepSteam
(specific
types only)
N.A.
N.A.