Herunterladen Inhalt Inhalt Diese Seite drucken

Synthetic Fibre Filter; Charcoal Filters; Lighting; Cleaning - ROBLIN SL639 Handbuch Für Installation, Bedienung Und Wartung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
2 - Replacement
a) Open the sliding visor.
b) Open the metal grille pushing the knobs towards the centre while pulling downwards.
c) Remove the wire clips and replace the synthetic fibre filter.

3.2 - Synthetic fibre filter

1 - This type of filter is printed with red dots. When the filter becomes saturated the red
colour of the dots will spread over the whole surface of the filter. At this point the filter
has to be replaced. The saturated filter cannot be cleaned or regenerated.
2 - Replacement
a) Open the sliding visor.
b) Open the metal grille pushing the knobs towards the centre while pulling downwards.
c) Remove the wire clips and replace the synthetic fibre filter.
d) Close the metal grille.

3.3 - Charcoal filters

1 - Functioning
In the recycling mode the charcoal filters absorb smell and odours. The charcoal
filter cannot be washed or regenerated and should be replaced every 2 months or
more frequently if the hood is used consistently.
2 - Replacement
a) Open the sliding visor.
b) Open the metal grille pushing the knobs towards the centre while pulling downwards.
c) Replace the charcoal filters by unscrewing the fixing knobs.
d) Close the metal grille.
ATTENTION - There could be a possible fire hazard if the filters are not replaced
according to these instructions.

3.4 - Lighting

a) One or two 40W lamps ensure the worktop lighting. These lamps can be reached by
removing the glass visor.
b) Should the two lamps fail to work, open the metal grille and ensure they are correctly
screwed into the holder.
c) When changing the lamp, an identical replacement must be fitted to ensure the safe
working of the cooker hood.

3.5 - Cleaning

When cleaning the hood:
- Never use a wet cloth or sponge, or running water;
- Never use thinners or products containing alcohol, as they might damage the
paintwork;
- Never use abrasive cleaning materials, in particular when cleaning stainless steel
surfaces.
It is recommended to use a damp cloth and mild liquid household cleaner.
Part 2 - USE AND MAINTENANCE INSTRUCTIONS
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis