Associated Standards And Regulations; Accessories; Technical Data - IKA M20 Betriebsanleitung

Electrical equipment may not be put into the cleansing agent for clea-
ning.
The operator shall consult the manufacturer before using a methode
of cleaning or decontamination other than the one wich is recom-
mended by the manufacturer in order to make certain that the method
wich the operator intends to wmploy will not damage the equipment.

Associated standards and regulations

Associated EU guidelines
EMC guideline: 89/336/EWG, 93/31/EWG
Low voltage guideline: 73/023/EWG
Machine-guideline: 89/392/EWG, 93/44/EWG, 93/68/EWG
Construction in accordance with the following safety standards
EN 61 010-1
EN 292-1, -2
UL 3101-1
Construction in accordance with the following EMV standards
EN 55 014-1
EN 50 081

Accessories

A 10
A 18 grinding chamber reduction element
A 11 cover
A 14 spare beater, stainless steel
A 15 beater, carbide metal
A 17 star-type blade, stainless steel
M 20
M 20.1 spar grinding chamber with cover
M 21 spare beater, stainless steel
10
M 22
M 23

Technical data

Design voltage:
Deign frequency:
Permissible ambient temperature:
Permissible relative humidity:
Degree of protction
Rated speed:
Motor:
A 10
EN 414
Maximum motor input:
CAN/CSA C22,2 (1010-1)
Ginding chamber useful volume:
Permissible operating time
EN 50 082-1
Interference supperssion:
Dimensions:
Weight:
M 20
Maximum motor input:
Ginding chamber useful volume:
Permissible operating time
Interference supperssion:
Dimensions:
Weight:
beater, stainless steel
star-type blade, stainless steel
VAC 230±
or VAC 115±
Hz 50/60
°C +5 bis +40
% 80
as in DIN 40 050: IP 21
1/min 20 000
universal motor
W 180
ml 50
(without cooling): min 5
as in VDE 0871
mm 120 x 105 x 225
kg 2,2
W 550
ml 250
(without cooling): min 7
as in VDE 0871
mm 170 x 170 x 350
kg 6,6
10%
10%
A10/M20 1097