Heating after a long time of inactivity / during first use
If you have not used it for some time, preheat the appliance as follows:
1) Fill the water tank 9 with tap water.
2) Place either the large i or the small espresso sieve o in the sieve holder u:
–
–
NOTE
►
Wait until the espresso sieve i o has cooled down before taking it out!
►
In order to remove the espresso sieves i o from the sieve holder u,
turn the inserted espresso sieve i o until the indentation on the espresso
sieve i o is located directly above the indentation on the sieve holder u.
You can now remove the espresso sieve i o.
SEM 1100 B3
Make sure that the small indentation on the large i or small espresso
sieve o is located above the indentation on the sieve holder u when
inserted.
Then turn the large i or small espresso sieve o slightly to ensure it
cannot fall out.
│
35
■
GB