Troubleshooting - Dometic DW6 Bedienungsanleitung

Troubleshooting

7 Troubleshooting
Problem
The refrigerator does
not work.
The refrigerator does
not cool sufficiently.
Condensation has
built up on the
outside of the refrig-
erator.
14
Possible cause
The power plug is not inserted.
The DC connection cable is not
inserted.
The connection cable or plug is
damaged.
The refrigerator is not level.
The ambient temperature is too
high.
The door is not closed properly.
The door has been opened too
often.
More than one power source is
being used.
The gap between the wall at the
side and back of the refrigerator is
too narrow.
The temperature has not been set
correctly.
The air vents are dirty.
The condensation tray is full.
The door does not close properly.
Suggested remedy
Connect the mains plug to an AC
socket.
Connect the DC connection cable
to the DC power supply.
Have the damaged connection
cable or plug replaced by an
electrician.
Position the refrigerator
horizontally.
Lower the ambient temperature.
Close the door.
Ensure that the door is not
obstructed.
Only open the door when it is
necessary.
Only use one power source.
Keep the minimum distance to the
side and back walls.
Set the temperature.
Clean the air vents with a soft
cloth.
Empty the condensation tray.
Ensure that the door is not
obstructed.
DW6
EN