Key Assignments - Wohler KM 410 Bedienungsanleitung

3.1

Key assignments

Key name
ON/OFF
SET
START
ESC
MODE
RECALL
HOLD
▲
MEM
▼
Min/Max/AVG
ON/OFF + START + MEM
Component explanation
Function
-Turns on and off the meter
- Enters setup mode while meter is off.
- Sets as non-sleep mode with HOLD .
Exits setup or recall mode.
- to exit a menu and
- to start and stop automatic logging.
- Press to switch between the measuring
modes.
- Hold this key pressed to enter the
memory recall mode.
- HOLD function: Freezes the current
readings
- Cancels data hold function
- In the SETUP menu: Selects unit or
decreases the value
- Printing the measurement data on a
printer: In measurement mode or Hold
mode, press for 3 seconds
- Manual record of the reading
- In the SETUP menu: Selects unit or
decreases the value
- Activates MIN, MAX, TWA, STEL func-
tion
- Saves and finishes settings
Enter calibration mode
EN
41