MADRIX NEBULA Kurzanleitung & Technisches Handbuch Seite 7

Installing The MADRIX
Start the installation process for the MADRIX
computer via CD, USB flash drive, or downloaded software installer. Follow the
on-screen installation instructions as described below.
PLEASE INSTALL THE SOFTWARE AND DRIVERS
BEFORE YOU CONNECT MADRIX
First, please choose your preferred language and
confirm with 'OK'. You may abort the process at any
time by clicking 'Cancel'.
Second, the 'Welcome' window appears. Click 'Next >' to start the installation.
Third, the 'License Agreement' will be shown. It outlines the terms you are
agreeing to when you install the software. You must accept these terms in
order to continue. Please click 'I Agree'.
Fourth, the 'Choose Components' window
allows you to select which items you
want to install. A description is given for
each item. The items 'MADRIX', 'MADRIX
KEY Driver', and 'MADRIX Interface
Driver' need to be selected and are the
most important items for operating the
MADRIX NEBULA. Click 'Next >'.
®
Fifth, the section called 'Destination Folder' allows you to select the location
on your harddisk where the software will be installed. Please use the button
'Browse...' to choose a location and then click 'Install'.
The installation process may take a few minutes.
Sixth, when the 'Installation Complete' window appears, click 'Next >'.
Seventh, uncheck 'Run MADRIX' and then click 'Finish' to complete the
installation process.
Software And Drivers
®
Software on your operational
®
NEBULA TO YOUR PC.
®
6
EN