Frequently Asked Questions (FAQs)
What do the blinking LEDs on the device mean?
Please read the chapter 'Description Of Status LED Codes' on page 15.
How can I change the IP address?
You can use the built-in web configuration tool as described on page 14.
The current IP address cannot be reached. What can I do?
You could perform a reset to factory default settings as described on page 15.
Does the device support RDM?
No. RDM is not supported by MADRIX
NEBULA at this time.
®
Is it possible to use more than one MADRIX
NEBULA?
®
Yes. Art-Net is recommended for large projects by connecting multiple devices
to a switch (1 GBit/s) via suitable components to create a network.
Where do I activate the Sync Mode?
You can activate it in the MADRIX
Software under 'Preferences...' à
®
'Device Manager...' à tab 'Art-Net'.
Where can I find the latest firmware update?
The latest MADRIX
Software also includes the latest firmware (see p. 18).
®
Can I use other controllers apart from MADRIX
to control LEDs?
®
Yes. When using MADRIX
NEBULA as a standard Art-Net node, you can use
®
it in combination with other software applications, consoles, and controllers.
Do I need a MADRIX
NEBULA and a MADRIX
KEY?
®
®
If you want to use the MADRIX
Software, yes. The MADRIX
Software license
®
®
is necessary and sold separately.
Can I repair MADRIX
NEBULA myself?
®
No. Do not attempt any repairs. Any attempt will void your warranty (see p. 3)!
What can I do if my unit does not work anymore?
Please contact your dealer or supplier if the device seems to be defective.
19
EN