MADRIX NEBULA Kurzanleitung & Technisches Handbuch Seite 14

Variation X2
Description: Power is supplied only once. It is supplied to NEBULA with 12 A max. and routed
through to all LEDs, which are connected to both ports via GROUND, DATA, possibly CLOCK, and
V+ with 6 A max. load for each port.
Variation Y2
Description: Power is supplied to NEBULA over USB and supplied separately to the LEDs
(as required). LEDs are connected to both ports via GROUND, DATA, and possibly CLOCK,
but not via V+!
Variation Z
Description: Power is supplied only once and it is only supplied to the first LEDs (as required)!
LEDs are connected to both ports via GROUND, DATA, possibly CLOCK, and V+ (6 A max.).
This variation is recommended for LEDs that use > 9 V, due to the expected voltage drop.
Alternative: Position the power supply between LEDs and NEBULA for LEDs with 5 V power supply.
13
EN