Technical Specifications - MADRIX NEBULA Kurzanleitung & Technisches Handbuch

End-Of-Life
This electrical device and its accessories need to be disposed of
properly. Do not throw the device into normal trash or household
waste. Please recycle packaging material whenever possible.
Usage
In general, this device is designed to receive control data over Ethernet
(Art-Net) or USB and convert the data into supported SPI protocols. It is a
hardware interface to be connected towards various types of controllable,
digital LEDs. Do not use the interface for any other, deviating purpose. The
device can be connected to and disconnected from USB or Ethernet network
during use and without a reboot (Hot Swapping & Plug and Play). Multiple
interfaces can be used at the same time.

Technical Specifications

Power supply:
(See pages 7 – 13)
Power consumption:
Data output:
Ports:
Ethernet (Art-Net):
USB port:
Case:
Dimensions:
Weight:
Temperature range:
Relative humidity:
Supported LEDs:
(As of September 2017 –
see www.madrix.com
for the latest information)
DC 5 V – 24 V, A) via 2-pin screw terminal (12 A max.),
B) via 5 V USB, C) via Port 1 or 2 sourced from LEDs;
6 A max. load per port when supplying through to LEDs
< 1.5 W during normal operation (300 mA max.)
8x 512 channels SPI TTL (Maximum output per port:
680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs)
2x ports (via 2x 4-pin screw terminals)
RJ45, 10/100 MBit/s (compatible with 1 GBit/s)
USB 2.0, type B plug
Non-conductive, IP20, UL94 V-0 flammability rating,
designed for 35 mm DIN-rails or wall mounting
92 mm x 70 mm x 45 mm (length x width x height)
111 g | 130 g incl. screw terminals and wall mounts
-10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage)
5 % to 80 %, non-condensing (Operating / Storage)
APA101, APA102, APA104, APA106, GW6201, GW6205, LPD1882S, LPD6803,
LPD8806, MBI6120, P9883, SJ1221, SK6812, SK6822, SM16703, SM16716,
TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903,
UCS512B3, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B,
WS2813, WS2815, WS2818, WS2822S, WS2822S Addressing
4
EN