Removing Of Major Parts - Sharp XG-P20XU Bedienungsanleitung

XG-P20XU
XG-P20XE
XG-P20XD
1. Removing the top cover and lens cover.
1-1. Remove the two screws and detach the lens cover.
1-2. Hold the lens top cover and tilt it up until its back end alone stays hooked. Then slide and detach the top cover.
Detach the lens shutter.
(When attaching the lens shutter back in position, match the left (L) and right (R) markings.)
1

REMOVING OF MAJOR PARTS

Lens Shutter
Lens Cover
1
http://www.pureglare.com.au
Top Cover
2
12