Replacement Parts And Wearing Parts - Beurer em 41 Gebrauchsanleitung

Storage conditions: -10 °C – 50 °C (14 °F – 122 °F) with a relative humidity
of 10 – 95%
Dimensions: 122 x 59 x 23 mm
Weight: 69 g (without batteries) , 108 g (incl. belt clip and
batteries)
Note: If the machine is not used according to these specifications, perfect
functioning is not guaranteed.
We reserve the right to make any technical alterations that are necessary in
order to improve and develop the product further.
This unit is in line with European Standards EN60601-1, EN60601-1-2 and
EN60601-2-10 and is subject to particular precautions with regard to elec-
tromagnetic compatibility (EMC). Please note that portable and mobile HF
communication systems may interfere with this unit. For more details, please
contact customer service at the address indicated.
The machine meets the requirements of the European Medical Products
Directive 93/42/EC and the German Medical Products Act. In accordance
with the Operators' Ordinance on Medical Products, regular measurement
precision controls must be carried out if the machine is used for commer-
cial or economic purposes. Even in the case of private use, we recommend
checking measurement precision at two-yearly intervals at the manufacturers.

12. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding
listed service address under the stated material number.
Designation
Back belt with 4 wear-free
water contact electrodes
8x adhesive electrodes
(45 x 45 mm)
4x adhesive electrodes
(50 x 100 mm)
Item number and/or order number
mat. no. 162.825
Art. no. 661.02
Art. no. 661.01
31