Contraindications - DeguDent Duceragold Kiss Verarbeitungshinweise

26 I 27 General instructions Duceragold Kiss
28 Shade conversion chart /Instructions for use
29 Instructions for use
30 General recommendations for firing
Release date: September 2006
Duceragold ® Kiss
Indications for use
• Duceragold Kiss is a ceramic material suitable for
veneering metal copings and frameworks for single
crowns and bridges with a coefficient of thermal
expansion (CTE) of 16,2 –17.1 µm/m·K (25–600 °C)
and for veneering the Cergo pressable framework
class ceramic.
• For dental use only

Contraindications

• Suitable only for the indications listed above
Warnings
Undesired side effects of these medical products
are extremely rarely to be expected with proper
processing and application. Immunoreactions
(e.g. allergies) and /or local unpleasant perceptions
(e.g. taste irritations or oral mucosa irritations), how-
ever, cannot completely be excluded on principle.
If you know any undesirable side effects – also in
doubtful cases –, then please communicate them
to us.
In case of hypersensitivity of the patients against
Duceragold Kiss veneering porcelain or one of the
ingredients, this medical product must not be used
or only used under strict supervision by the treating
physician/dentist.
Known cross-reactions or interactions of the
medical product with other medical products or
materials existing in the mouth must be taken
into account by the physician/dentist when using
the medical product.
26
Please pass on all the above-mentioned information
to the treating physician/dentist, when processing
this medical product for an individually manufactured
object. Notify the dentist or physician in charge of
all factors described above if you use this medical
product for a custom construction.
• Do not inhale abrasive dusts
• Pastes and paste fluid are harmful if swallowed
(R 22).
Precautions
When working with these materials, make sure
to comply with the Instructions for Use and the
pertinent Material Safety Data Sheets (MSDS).
Adverse reactions
We are not aware of any risks and /or side effects
related to Duceragold Kiss veneering porcelain.
Technical data
• CTE dentine: 15,1 µm/m·K (25–500 °C)
• Dental ceramics, type 1, class 2–8 according
to DIN EN ISO 6872
• Metal-ceramic bond, flexural strength and
chemical solubility according to DIN EN ISO 9693
• Use only with alloys with a solidus temperature of
at least 900°C.
Alloy selection
• Duceragold Kiss is compatible with high-gold alloys
(such as Degunorm and Degunorm supra/pur).
Ask the alloy manufacturer about the alloy's
composition and coefficient of thermal expansion.
If the cooling times are observed, bonding alloys
with a CTE of 16.2–17.1 µm/m·K (25–600 °C) can be
recommended.
Market launch: May 2003
GB