Technical Data; Model Features Ts Mono; General Warnings; Operating The Transfer Press - SISER TS-MONO Gebrauchsanweisung

2 TECHNICAL DATA

2.1 Model Features TS MONO

Work area
Power Consumption
Temperature
Timer
Weight
Main Voltage
Printing Pressure

2.2 General warnings

The press has been designed in compliance with the principles of the Machinery Directive.
Already at the design stage, solutions have been adopted that eliminate risks for the operator
in all phases of use: transport, regulation and maintenance. The materials used for the
construction and the components used with the machine are not dangerous and make the press
compliant with current regulations.

2.3 Operating the Transfer Press

This transfer press can be used for transferring thermically weldable materials onto any kind
of textiles.
Not more than one person may operate the press at a time. Avoid exceeding the specified
maximum temperature when operating the press.
Siser is not liable for faults, accidents, damages, losses etc. resulting from not following the
instructions in this manual.
Note: It is strictly forbidden to operate or mount this transfer press contrary to the directions
made in this manual.
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
40 x 50 cm
2000 W
0 - 250°C
0 - 999 sec
90 kg
220 – 240 V
1,2-1,5 Kg/cm² - 2-10Bar
TS-MONO Manual for use and maintenance
Mod. PRD 20/3 - Last updating 02/2018
TS
MONO
2
EN
19