Child Lock Function; Setting Time; Open Window Function; Cleaning And Care - Klarstein NORDERNEY 10032787 Bedienungsanleitung

Child lock function

1. To set the heater to a standby mode and apply the child lock function, simply
hold the OK key and wait for 5 seconds. You will see the padlock image lock on
the LCD screen.
2. To unlock, press the OK key for 5 seconds.

Setting time

To set the time press the TIME key, when the hour digits "12" starts to blink, use
up and down keys to set the hour and confirm by pressing TIME key. Now minute
digits "00" to blink, use up and down keys to set the minute and confirm the
minute by pressing TIME key again.

Open window function

1. The heater is fitted with state of the art energy saving technology such as the
open window function.
2. To activate this function, press and hold the TEMP button for 5 seconds. The
window icon appears on the LCD screen.
3. When the open window icon appears, the heater will stop heating and window
icon flashes, as long as the room temperature drops by 4 °C in 20 minutes. If
want to heating and the open window function does not flash, please press
and hold the TEMP button for 5 seconds.
4. To deactivate the function, press and hold the TEMP key for 5 seconds
again,then the window icon will disappear.

CLEANING AND CARE

Note: Turn off the unit and unplug it from the power outlet. Wait until the unit
has completely cooled down before cleaning it.
• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust on the outside surfaces with a damp (not wet) cloth.
• Do not use strong cleaning agents or abrasives.
• Do not spray the device with liquids or immerse it in water or other liquids.
• Never open the heater housing.
EN
25