Troubleshooting - Yard Force M0L-4ET-200 Original Bedienungsanleitung

WARNING!
Before performing any repair work, always remove the battery pack and wait until the cutting blade has
come to a standstill.
CAUTION!
Improper repairs can result in the product functioning unsafely. This endangers yourself and your
environment.
Faults which cannot be rectified with the aid of following table may be rectified by a specialist company
only (customer service center).
Please be aware that any improper repairs will also invalidate the warranty and additional costs may
be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the product.
The use of other spare parts not only voids the warranty, you can also endanger yourself and your
environment.
Fault/malfunction
Product not running.
The pruner operates
intermittently
Saw chain is not working
Saw chain always falls off
Motor is running, but the saw
chain doesn't work

TROUBLESHOOTING

Cause
Battery discharged?
Battery pack does not sit its
place correctly
Internal wiring of machine
damaged
Motor is damaged
Switch is damaged
Switch is damaged
Internal loose electrical
connection
Saw chain is blunt
The groove of the chain bar is
blocked by foreign objects.
Over tension
Lack of lubricating oil
Poor connection may exist in
certain coupling device.
Transmission shaft is damaged
57
Remedy
Charge rechargeable battery.
Install the battery pack once
again
Contact service partner.
Contact service partner.
Contact service partner.
Contact service partner.
Contact service partner.
Replace it
Clean the groove of the chain bar
Readjust the tension degree
Clean the oil nozzle
Refit the extension rod, cutting
head.
Contact service partner.