Storing And Maintenance; Battery Maintenance; Transport - Yard Force M0L-4ET-200 Original Bedienungsanleitung

WARNING!
Before performing any repair work, always remove the battery pack and wait until the cutting blade has
come to a standstill.
1. Do not spray the unit with water. Ingress of water may destroy the battery pack and the electric
motor.
2. Clean the unit with a cloth, hand brush, etc.
3. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;
4. Replace worn or damaged parts for safety.
5. Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
6. Dry guide bar and chain.
7. Place chain in container filled with oil. This will prevent rust.
8. Wipe a thin coating of oil over surface of guide bar.
9. It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank
after each use then run for one minute.

Battery Maintenance:

Use the following procedures to enable optimum usage of the battery:
1. Protect the battery against moisture and water.
2. Store the battery only within a temperature range from 0ºC to 45ºC .As an example, do not leave
the battery in a vehicle or in the pruner in direct sunlight.
3. Clean the electric contacts of the battery occasionally with a soft, clean and dry brush. A
considerably shortened operating time after charging is an indication that the battery is exhausted
and must be replaced.
4. If you do not use the product for a long time, please charge and discharge the battery pack once
every 6 months.
Storage:
Clean the exterior of the machine thoroughly using a soft brush and cloth, Do not use water, solvents
or polishes.
Store the machine in a dry place. Do not place other objects on top of the machine.

Transport

Use the original packaging to ship whenever possible.

STORING AND MAINTENANCE

56