General Specifications; Sensors - Facom DX.T10 Bedienungsanleitung

● Input Connector: Standard miniature thermocouple connectors
(fl at blades spaced 7.9mm, center to center).
● Temperature Response: Temperature indication follows
Reference Temperature/Voltage Tables N.I.S.T. Monograph 175
Revised to ITS -90 for K-type thermocouples.
5.2 General specifi cations
● Display: 3 ½ digit liquid crystal display (LCD) with maximum
reading of 1999
● Over-Range: (OL) or (-OL) is displayed
● Low battery indication: ì†symbole batterie†î is displayed when
the battery voltage drops below the operating level
● Sample rate: 2.5 times per second, nominal.
● Environment:
Operating: 32°F to 122°F (0°C to 50°C) at < 80% relative humidity
Storage: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH with
battery removed from meter
● Auto power OFF: 15 seconds approx.
● Altitude: 2000m max.
● Input Protection: 24VDC or 24rms maximum input voltage on
any combination of inputs.
● Battery: Standard 9V battery (NEDA 1604, IEC 6F22 006P,
or equivalent)
● Battery Life: 100 hours (continuity) typical with carbon-zinc
battery (Back-Light not illuminated)
● Dimensions: 173mm(H) x 60.5mm(W) x 38mm(D)
● Weight: 183g including batteries
● Electromagnetic compatibility
Emitting source according EN 61326-1 + A2 ed. 2001
Immunity according EN 61236-1 + A2 ed. 2001
● Safety: EN 60825-1 ed. 1994 + A1 + A2,
EN 61010-1 ed. 2001, Protection Class II
Overvoltage Category (CAT I, 30V), Pollution Degree 2, Indoor Use

6. SENSORS

The following K-type thermocouple sensors can be used with thermometers DX.T10.
Sensors with grips and extendible spiral leads
Reference Description.
DX.12-06 Flexible probe
DX.12-08 Bracelet probe
DX.12-11 Standard probe
DX.12-15 Contact probe
DX.12-17 Air probe
DX.12R Extension
18
NU-DX.T10_0906.indd Sec1:18 NU-DX.T10_0906.indd Sec1:18
Measurement Reponse
range. time
-50°c ➜ +285°c 3 s
➜
-50°c +140°c 10 s
➜
-50°c +140°c 10 s
-50°c ➜ +900°c 2 s
-50°c ➜ +600°c 2,6 s
Length 1 m
24/07/2007 14:55:26 24/07/2007 14:55:26