Precautions For Use - Facom DX.T10 Bedienungsanleitung

Signifi cance of symbole
Warning! Please refer to the Userís Manual before using the
instrument.
In this Userís Manual ,the instructions preceded by the above
symbol, should they not be carried out as shown, can result in a
physical accident or damage the instrument and the installations.
Signifi cance of the LASER symbol .
Laser radiation, do not look into the LASER beam.
LASER output < 1 mW
Wawe lenght 630➞670 nm
Class II LASER, as per IEC 60825 standard (Ed. 1991)
Thank you for purchasing this DX.T10 thermometer.
To get the best service from this instrument:
❋read this userís manual carefully
❋ respect the safety precautions detailed

PRECAUTIONS FOR USE

■ Do not place the thermometer on or close to objects with
temperatures of > 65°C (150°F)
■ If the thermometers is subjected to strong ambient tempera-
ture
variations, wait 20 minutes after stabilization before resuming
measurement.
■ Do not expose the thermometer to strong electrical or
magnetic fi elds since they may cause measurements errors (e.g.
induction heating, arc welding kits, etc.).
■ Do not direct the LASER beam towards your eyes.
■ Comply with the environmental conditions (see ß 5)
■ Keep the lens perfectly clean.
CONTENTS
1. PRESENTATION ................................. 12
2. OPERATION - EMISSIVITY .................. 12
3. DESCRIPTION ................................... 13
4. USE.............. .................................... 14
5. SPECIFICATIONS.... ............................ 17
6. SENSORS........................................... 18
7. MAINTENANCE ................................... 19
8. EMISSIVITY TABLE............................... 19
NU-DX.T10_0906.indd Sec1:11 NU-DX.T10_0906.indd Sec1:11
EN
11
24/07/2007 14:55:21 24/07/2007 14:55:21