Specifications - Facom DX.T10 Bedienungsanleitung

In the case of small measurement points, it is important to bring
the probe suffi ciently close to the target to avoid including other
points in the measurement fi eld.
Diameter of measurement fi eld
0
Distance from target

5. SPECIFICATIONS

5.1 Electrical
Infrared
● Temperature Scale: Celsius (°C) or Fahrenheit (°F) user-selectable
● Temperature Range: -4°F to 1022°F (-20°C to 550°C)
● Display Resolution: 0.1°C/°F or 1°C/°F
● Accuracy: ±2% of reading or ±6°F/3°C, whichever is
greater at 64.4 to 82.4°F (at 18 to 28°C) ambient operating
temperature.
● Temperature Coeffi cient: Changes in accuracy operating
temperature
above 82.4°F/28°C or below 64.4°F/18°C: ±0.2% of reading or
±0.36°F/ 0.2°C, whichever is greater.
● Response Time: 1 second
● Laser: Red, <1mW (630➞670 nm) Class II, 2 - 50ft Range.
● Spectral Response: 6 to 14µm nominal
● Emissivity: Pre-set at 0.95, user selectable from 0.10 to 1.00
● Detection Element: Thermopile
● Optical Lens: Fresnel Lens
● Field of View (FOV) ratio: 10/1 (Distance: Diameter)
K Type
● Temperature Scale: Celsius (°C) or Fahrenheit (°F) - User-selectable
● Temperature range of the instrument in function of the K type
thermocouple chosen (see ß 6) : - 40 to +1350°C (-40 to
2000°F) -40 to 200°C (-40 to 392°F) with the K
type thermocouple supplied as standard.
● Resolution: 0.1°C/°F or 1°C/°F
● Accuracy (meter): -40°C to 1350°C: ±(0.1% rdg ± 1°C) on
-40°F to 2000°F: ±(0.1% rdg ± 2°F) (Accuracy is specifi ed for
operating temperatures over the range of 18°C to 28°C, for
1year, excluding the sensor)
● Temperature Coeffi cient: 0.1 times the applicable accuracy
specifi cation per °C from 0°C to 18°C and 28°C to 50°C
● Input Protection: 24VDC or 24Vrms maximum input voltage on
any combination of inputs.
● Sample Rate: 2.5 times per second.
NU-DX.T10_0906.indd Sec1:17 NU-DX.T10_0906.indd Sec1:17
Ø 200 mm
Ø 150
Ø 100
Ø 50
50 100 150 200 cm
24/07/2007 14:55:25 24/07/2007 14:55:25
17