Control; Empty Memory - Imperial DABMAN 100 Bedienungsanleitung

7. DAB
7.2.3 DRC - Dynamic Range Control
E D
The DRC dynamic range control will reduce the difference in volume between the
loudest and the least loud signal of a transmission – in practice this means that
quiet tones will be reproduced relatively more loudly, and loud notes will be played
relatively less loud. Switch the DRC on or off in accordance with your listening
preferences, as follows:
While in DAB mode press the Menu key (on the remote control or on the radio),
you will be taken to the DAB menu.
Use the ◄► keys to navigate to the item "DRC".
Confirm by pressing the Enter key. You will be taken to the DRC menu. Use the
◄►keys to select from the option "high", "low" and "off", confirm your selection by
pressing the Enter key, You will be taken back to the DAB mode.
Note: The default setting for DRC is off.

7.2.4 Empty memory

You can use the empty function to remove DAB stations from the station list. This
function may be useful, e.g. if you want to operate the radio at a different location
where previously received stations (e.g. local stations) can no longer be received,
or where DAB stations have ceased broadcasting, or have changed the channel.
To do this, proceed as follows:
While in DAB mode press the Menu key (on the remote control or on the radio),
you will be taken to the DAB menu.
Use the ◄► keys to navigate to the item "Empty".
To confirm, press the Enter key, you will be taken to the sub-menu. Use the ◄►
keys to select from the options "yes" and "no". Confirm your selection by pressing
the Enter key, you will be taken back to DAB mode.
46