Imperial DABMAN 100 Bedienungsanleitung Seite 37

6. OPERATION
E D
from 1 to 10), use the ◄► keys to select the desired station, confirm by pressing
the Enter key.
In the next step you can select the frequency of the alarm. Here, the following
options are available: Weekdays (alarm is activated for Monday to Friday, Once
(alarm is activated only once), Weekend (alarm is active only on Saturday and
Sunday). Use the ◄►keys to select the desired option, confirm by pressing the
Enter key.
In the next step you can determine the volume of the alarm, which you can select
by using the ◄► keys (◄ volume lower, ►volume higher), the setting can be made
by observing a volume bar on the display, confirm by pressing the Enter key.
In the last menu point you can activate or deactivate the alarm (option on or off)
using the ◄► keys. Confirm by pressing the Enter key.
Alternatively:
Press the Alarm key on the remote control, then proceed with the configuration
as described above.
The alarm has now been set, the display will show a stylized alarm logo in the up-
per left corner next to the time.
When the alarm switches on, you can use the Snooze key to interrupt the alarm.
This will then go off again after a specified period (approx. 10 minutes).
6.2.3 Equalizer
The equalizer allows you to adjust the sound of the DABMAN 100 individually.
Here you can either define an own sound profile (select "My EQ") or you can se-
lect one of the pre-defined sound profiles. To call up the equalizer menu proceed
as follows:
Press the Menu key on the remote control.
Use the ◄► keys to navigate to the item "Equalizer".
37