Operation - Abus Secvest Key Installations- Und Bedienungsanleitung

Operation

Training in Secvest
Setup Mode  Other Devices  Door Locks / Secvest Key  Add/Del Door Lock / Key
Select a Key (Key1, Key2, Key3 or Key4). "Please insert battery" then appears in the display.
Insert the battery. The Secvest Key sends a training signal to the alarm centre. After the Secvest Key has been trained successfully, a
symbol appears next to the selected device.
Assigning the partitions
Setup Mode  Other Devices  Door Locks / Secvest Key  Edit Key / Door Lock
Select the trained Secvest Key (Key1, Key2, Key3 or Key4). You can then define the partitions that should be switched by the Secvest Key.