Fine Tuning The Instrument - Korg SV-1 73 Anleitung

28 – Advanced settings | Fine tuning the instrument
F
INE TUNING THE INSTRUMENT
You can fine tune the instrument, to adapt to another instrument that cannot be
tuned.
Press the FUNCTION button.
1.
After you press the FUNCTION button, its LED starts blinking. Also, one of
the LEDs around the TREBLE knob in the EQUALIZER section starts blink-
ing.
Use the TREBLE knob to edit master tuning. By default, the SV-1 is tuned to
2.
the standard Western tuning (A = 440Hz). Use the TREBLE knob to change
this, by lowering or raising the pitch of 0.25Hz per each click of the knob.
The LEDs around the knob show the nearest value of the pitch detuning.
To restore tuning to the original A = 440Hz, press the TREBLE knob.
3.
NOTE: When the instrument is turned off, the fine tuning is reset.
HINT: You can edit the fine tuning by using the Master Tune function in the
SV-1 Editor, and memorize it by choosing the Write Global command.