Pairing The Mobile Pd With A Phone; Initiate The Pairing - Assa Abloy Cliq Bluetooth-Kopplungsanleitung

I
Bluetooth pairing guide (DUN)

Pairing the Mobile PD with a phone

To use the Mobile PD with a Bluetooth enabled mobile phone, they need to be
paired.

Initiate the pairing

Note!
It may be necessary to enter the PIN: The Mobile PD uses a fixed PIN code
"1234", which possibly needs to be entered in the mobile phone when pairing.
The PIN code is always needed when pairing with a mobile phone that uses
Bluetooth v2.0 (or below). If the mobile phone supports Bluetooth v2.1 (or bet-
ter), the manufacturer might choose not to ask for the PIN code (using the "Just
works" pairing method).
1 Activate Bluetooth on the mobile phone.
2 Scan for devices.
When pairing, a key should be inserted into the Mobile PD. This will start the
Mobile PD, and make it possible to pair a mobile phone. The Mobile PD
remains discoverable for pairing as long as it is powered.
3 Select the desired Mobile PD on the mobile phone to complete the pairing.
When the pairing is completed, the key can be removed.
 You have started the pairing attempt.
57
EN