Mobile Pd Specific Configuration; Access Point Name (Apn); Dial-Up Internet Access Number; Wap Default Context - Assa Abloy Cliq Bluetooth-Kopplungsanleitung

Mobile PD specific configuration

In the Remote PD view of CLIQ Web Manager, under the BLUETOOTH PHONE
SETTINGS, the following parameters are used only when connecting the Mobile
PD via the Bluetooth DUN profile:

Access point name (APN)

This is the APN (Access Point Name) used by the network operator. An example is:
"online.telia.se". This setting should be provided from the mobile operator. When
this setting is updated using a configuration file, the parameter is named "APN".

Dial-up Internet access number

This is the number that should be used to gain network access, for example
"*99#". This is a specific setting for the network operator that should be provided
from the network operator. When this setting is updated using a configuration
file, the parameter is named "CALL_NR".

WAP default context

This is the location in the phone where the settings for the Internet connection
are stored. It is a phone specific setting and the correct value should be provided
from the phone documentation. In most cases the setting should have the value
"1". When this setting is updated using a configuration file, the parameter is
named "CGDCONT".
If the Mobile PD is using a USB (CDC) connection or a Bluetooth PAN profile to
connect to the network, the DUN parameters are not used. In these cases the APN
field must be empty (the other parameters are ignored).
EN
56 Bluetooth pairing guide (DUN)