E) „Split Point" Function; F) „Dsp Level" Function; G) „Midi In Channel" Function; H) „Midi Out Channel" Function - MC Crypt DP-263 Bedienungsanleitung

e) „Split Point" function
This function allows you to determine at what position the keyboard is
split into two sections (e.g. left section for drums, right section for pia-
no).
Press the „FUNCTION" key repeatedly until „Split pt" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „1" to „88", default is „34"). The value represents the number of
keys in the left section.
You can also set the split point by pressing a key. The
pressed key is the last key of the left section.
f) „DSP Level" function
Press the „FUNCTION" key repeatedly until „DSP Level" appears in
the display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „OFF" to „7", default is „2").
g) „MIDI IN Channel" function
Press the „FUNCTION" key repeatedly until „Midi In" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „1" to „16", default is „ALL").
h) „MIDI OUT Channel" function
Press the „FUNCTION" key repeatedly until „Midi Out" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „1" to „16", default is „1").
58