Connections; A) Headphones Sockets; B) Audio Output „Aux Out; C) Usb - MC Crypt DP-263 Bedienungsanleitung

9. Connections

a) Headphone sockets
Two headphone sockets - (1) and (2) - are located on the underside.
When headphones are connected to socket (1), music is played through
the headphones as well as the loudspeakers in the digital piano.
When headphones are connected to socket (2), the loudspeakers in
the digital piano are switched off and music is only played through the
headphones.
Only connect headphones after turning down the volume of the digital piano completely (to the minimum).
When using headphones, do not turn up the volume too much to avoid hearing damage!
b) „AUX OUT" output
The „AUX OUT" sockets at the back provide a stereo line signal for
output e.g. on a hi-fi system.
Use a suitable cable to connect these sockets with the line input of your
hi-fi system (do not use the phono connection!).
Before connecting the two devices with each other, turn down the volume
of the digital piano as well as the hi-fi system completely.

c) USB

Connect the USB socket on the digital piano with the USB port of your
computer using a suitable USB cable.
The required drivers are part of the operating system (Windows ME or
higher, Windows XP/Vista recommended).
Follow the Windows instructions to install.

d) Pedals

If you have not already done so, connect the pedal cable to the respective
socket on the digital piano.
47