Function Settings; A) „Transpose" Function; B) „Tune" Function; C) „Beat" Function - MC Crypt DP-263 Bedienungsanleitung

14. Function settings

Press the „FUNCTION" button repeatedly to activate different functions that are described in the following sections. Press the „FUNCTION"
button repeatedly until the desired function type is displayed.
If no button is pressed for five seconds, the function menu is exited automatically.
a) „Transpose" function
Press the „FUNCTION" key repeatedly until „Transpos" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „-12" to „12" halftones, default is „0").
b) „Tune" function
This function allows you to manually tune the piano.
Press the „FUNCTION" key repeatedly until „Tune" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(from „-50" to „50", default is „0").
c) „Beat" function
This function allows you to set the tempo of the metronome when no
accompaniment rhythm is activated.
Press the „FUNCTION" key repeatedly until „Beat" appears in the display.
Use the control wheel or the „+" and „-" keys to select the desired value
(„0" or from „2" to „9", default is „4").
d) „Touch" function
This function allows you to set the sensitivity of the keys.
When „OFF" is selected, touch sensitivity is inactive.
Press the „FUNCTION" key repeatedly until „Touch" appears in the
display.
Use the control wheel or the „+" and „-" keys to select the desired value
(select „OFF", „1", „2", or „3", default is „2").
57