Video Input - Pioneer VSX-832 Bedienungsanleitung

> Before Start > Part Names
Impose OSD Set whether or not to display the information on the TV when the
volume is adjusted or input is changed, for example.
"On (default value)": Display OSD on the TV
"Off": Do not display OSD on the TV
0 OSD may not be displayed depending on the input signal
even if "On" is selected. If the operation screen is not
displayed, change the resolution of the connected device.
Screen Saver Set the time to start the screen saver.
Select "3 minutes (default value)", "5 minutes", "10 minutes", or
"Off".
∫ HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
BD/DVD "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the BD/DVD input selector. If you do not assign
a jack, select "---". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "---"
first. (Default Value is "HDMI 1 (HDCP 2.2)")
CBL/SAT "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the CBL/SAT input selector. If you do not assign
a jack, select "---". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "---"
first. (Default Value is "HDMI 2 (HDCP 2.2)")
GAME "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the GAME input selector. If you do not assign a
jack, select "---". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "---"
first. (Default Value is "HDMI 4 (HDCP 2.2)")
STRM BOX "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the STRM BOX input selector. If you do not
assign a jack, select "---". To select an HDMI IN jack already
assigned to another input selector, change the input selector
setting to "---" first. (Default Value is "HDMI 3 (HDCP 2.2)")
> Install > Initial Setup > Playback
Advanced Setup

∫ Video Input

You can change input assignment between the input selectors and VIDEO IN jacks. If you
do not assign a jack, select "---".
BD/DVD "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
BD/DVD input selector. (Default Value is "VIDEO 1")
CBL/SAT "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
CBL/SAT input selector. (Default Value is "VIDEO 2")
GAME "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
GAME input selector. (Default Value is "---")
STRM BOX "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
STRM BOX input selector. (Default Value is "---")
∫ Digital Audio Input
You can change input assignment between the input selectors and DIGITAL AUDIO IN
COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
BD/DVD "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the BD/DVD input selector. (Default Value is "---")
CBL/SAT "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the CBL/SAT input selector. (Default Value is "---")
GAME "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the GAME input selector. (Default Value is "---")
STRM BOX "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the STRM BOX input selector. (Default Value is "---")
CD "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the CD input selector. (Default Value is "COAXIAL")
TV "COAXIAL", "OPTICAL": Assign a desired DIGITAL AUDIO IN
jack to the TV input selector. (Default Value is "OPTICAL")
0 Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, 24 bit.
| Supplementary Information | Others
45
En