Mcacc; Full Auto Mcacc; Manual Mcacc - Pioneer VSX-832 Bedienungsanleitung

> Before Start > Part Names

MCACC

1
2
> Install
INPUT
> Initial Setup > Playback
Setup the speakers automatically or make desired changes to the equalizer. You can also
check the values set currently for each speaker setting.
1. Switch the input on the TV to that assigned to the unit.
2. Press on the remote controller to display the Home screen.
3. With the cursors on the remote controller, select "MCACC", and then press ENTER.
4. Select the item with
your selection.
0 Change the initial values for each of the settings with the cursors  /
0 To return to the previous screen, press
5. To exit the settings, press

Full Auto MCACC

Place the supplied speaker setup microphone in the listening position, measure the test
tones emitted by the speakers, then the unit automatically sets the optimum volume level for
each speaker, the crossover frequencies, and the distance from the listening position. This
also automatically adjusts the equalizers for the speakers and enables correction of
distortion caused by the acoustic environment of the room.
Refer to "1. Full Auto MCACC" in Initial Setup (P20) for details.

Manual MCACC

∫ EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also adjust the
output volume of the range of each connected speaker to suit your own preferences. You
can adjust the volume of the different sound ranges for each of the speakers. You can set
three different equalizers in Preset 1 to 3. You can select up to four bands for the Subwoofer
and nine bands for all other speakers. To use the set equalizer effects, select the preset
number in "AV Adjust" - "MCACC" - "Manual EQ Select" (P61).
Advanced Setup | Supplementary Information | Others
/ /  / on the remote controller and press ENTER to confirm
.
.
.
55
En