Lawn Preparation - Bosch Indego 350 Installationsanleitung

Lawn preparation

1
First you will need to prepare the lawn. This is a key step
for a successful installation. Please have a close look at
your lawn and any objects on it.
Remove foreign objects
1.1
from the cutting area.
Clear lawn of stones, loose pieces of wood,
wire, mains cables, and other foreign objects.
Identify any objects
1.2
(trees, flower beds, ponds, ...) to ensure you
know what items to follow when marking the
garden. These will need to be wired around
later. Slopes bigger than 27%, etc.
8
1.3
!
1.4
GB
Cut the main area
of the lawn
to 40 mm.
Cut the area where
you intend to lay the
perimeter wire
to the lowest setting you have with
your conventional mower.
Now your lawn is
ready to start the
installation.
9