Your Indego Is Intelligent - Bosch Indego 350 Installationsanleitung

Your Indego is intelligent

!
How your Indego cuts efficiently
Logicut Intelligent Cutting –
During the first 3 full cuts your Indego
▶ learns the shape of the cutting area it is working in
▶ learns the location of the objects within it: trees, flower beds, ponds, etc.
(only those objects that are marked out during installation are learnt)
How your Indego learns the lawn shape
Mapping the cutting area
1
1. After setup, your Indego will first map out the shape of the garden by following the perimeter wire.
Your Indego then builds up a map of the garden that is saved into its memory.
2. When mapping Indego will only follow the outer perimeter wire.
Note: your Indego does not follow the wire to the inner boundaries.
Learning the location of objects marked out with
2
the perimeter wire
1. Once your Indego has the cutting area mapped it can start to cut the grass.
2. After pressing "Mow Now" your Indego will leave the docking station and start to cut the border of
the marked out garden. After finishing the border cut it starts to cut the grass in parallel lanes. It
continues cutting until it completes a section of the cutting area or until it discovers an object that
has been marked out, using the perimeter wire. Your Indego will follow it around to establish its shape.
3. Your Indego will then drive to the outer perimeter wire and follow it until it reaches the docking station
to confirm the location of the object.
4. The new discovered object will be saved automatically in the map.
This process will be repeated with every object.
Note: during the first 3 complete full cuts, your Indego will learn the location of the objects within
the garden. This is to make sure that all objects in the garden are discovered and their location on
the garden map is accurately logged.
Intelligent mowing!
3
Your Indego is ready to start cutting the lawn in sections of parallel lines,
as soon as the lawn has been mapped and obstacles have been identified.
This ensures an efficient mowing session as Indego then knows exactly
where it needs to cut, where grass has already been cut and the way back
to the docking station to recharge.
Note: 3 complete mowing sessions, ensure that the entire lawn has been cut.
In order to leave a beautiful lawn, and reach difficult areas, your Indego will
change the direction of the lanes every time that it has finished a full cut of
your lawn. So the next time it starts again it will start in a different direction but
always keeping the parallel lanes and its efficiency.
20
1
Border cutting
Your indego will always start with the border cut to ensure
that the edges are tidy, before commencing a new full cut
of the lawn.
2x
2
3
Battery charging
Your Indego returns to the docking station every time it needs
recharging. When charging is complete it will return to mowing.
GB
21