Quickstart (Basic Orientation); Training Readiness; Starting Training; Training Pause - Kettler M-Display Anleitung

Training and Operating Instructions
14
EN
Quickstart (for basic orientation)
Without Specific Settings
• Press a key
Display:
• All segments are briefly displayed. (Segment Test)
• The total hours and kilometers are briefly displayed.
Thereafter, change to the display "Training Readiness"

Training Readiness

Display:
• All areas display "zero" except pulse (if active)
Start training by pedaling
Training Start
Display:
• Pedal Rotation segments, Distance, Speed, Energy and
Time: count goes upwards.
• Pulse (if active)
Brake Adjustment:
• By turning to the right the brake level is raised, and by
turning to the left it is reduced.
Training Pause or End
At Training Pause or End, Average Values from the last
training unit are displayed with the Ø symbol.
Display
• Average Values (Ø):
Pedal Rotations and Speed
• Total Values
Energy, Distance and Time
• Current Pulse (if active)
Standby Mode
Device switches to Standby mode 4 minutes after Training
End.
Press any key; Display begins again with Segment Test,
display of total hours, total kilometers and training readi-
ness.