Handling And Operation; Activating The Settings Menu; Setting The Time - Silvercrest SKRI 2000 A1 Bedienungs- Und Sicherheitshinweise

Activating the settings menu

GB

Setting the time

122
To activate the settings menu, in the mode clock/standby operation press the
button Mode / Lock
11
time of day, shown in the display
the button Mode / Lock
item sequence is:
▯ Setting the time of day
▯ Setting the date
▯ Setting the memory function
▯ Set the Update Mode
▯ Switch display dimmer on/off
▯ Set display dimmer start time
▯ Setting the time of day format
NOTICE
► The setting menu ends automatically if you do not actuate any buttons for
approx. 15 seconds. The executed setting(s) is/are saved.
Prerequisite: The appliance is in the operational mode clock/standby operation.
♦ Press the button Mode / Lock
control once. The time of day indicator begins to blink.
♦ Using the buttons
/ Down buttons
press on the button the time of day changes by one minute. Holding the
respective button down for more than 2 seconds starts the speed setting.
♦ Press the button Mode / Lock
control, once again to save the current setting and move on to the next
menu item.
NOTICE
► The time of day will revert back to
from the mains power supply and no battery is inserted or if the battery is
too weak.

Handling and operation

or the button Mode Lock
, begins to blink. Each further actuation of
or switches to the next setting potential. The menu
11 45
or the Mode Lock button
11
/ Up and / Down
i i
17
on the remote control, set the current time. With each
32
, or the Mode Lock
11
if the appliance is disconnected
on the remote control. The
45
on the remote
45
or the / Up
19
button on the remote
45
SKRI 2000 A1
and
42