Measuring Object Temperatures - Silvercrest 6-in-1 Gebrauchsanleitung Und Sicherheitshinweise

measuring object temperatures

To switch on the multi-function thermometer, press the ON / OFF /
MEASURE button
Then press the m button
for 3 seconds to change to the object temperature mode. appears
on the LCD display.
Point the sensor tip towards the object
or the liquid to be measured (never
immerse in liquids!) at a distance of 3 cm
and press the ON / OFF / MEASURE
button for 1 second. (never immerse
8
in liquids!).
Release the ON / OFF /
MEASURE button
ured value appears on the display
and the end of measurement is in-
dicated with a short beep (when
the key tone is activated). The next measurement is possible after
approx. 5 seconds.
To leave object temperature mode once more, hold the m button
and the s button
9
If you have activated Bluetooth
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
note: The „HealthForYou" app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter „transfer-
ring measured values".
The device switches off automatically after 60 seconds, or press
the ON / OFF / MEASURE button
for one second.
8
and the s button
9
. The meas-
8
at the same time for 3 seconds again.
7
data transfer, the data will be
®
during transfer.
®
at the same time
7
2-3 cm
for 5 seconds to switch it off.
8
GB/MT 129