Werbung
Problem
The display does not light and there
is no output sound.
Display lights but sound is not
produced
No sound from Centre channel.
Sound from one channel only
Sound channel no sound
Instrument sound reversed in stereo
playback
Receiver does not operate
correctly with remote
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
Troubleshooting guide
Possible Cause
Power cord not plugged in
securely.
Speaker connections not secure
Volume control at minimum level
Speaker connections not secure
Centre channel volume set to
minimum.
Speaker connections Input/Output
connections Left/Right balance off
Speaker connections Surround
channel volume set to minimum
Incorrect speaker polarity
Incorrect input polarity
Batteries dead
Batteries inserted incorrectly
Remote too far from receiver
Obstacle between remote and
receiver
Incorrect button being used
Suggested Solution
Check power cord &
plug connection.
Connect securely
Turn volume up
Connect securely Adjust Centre
channel volume control.
Connect securely Connect
securely Adjust balance control
Connect securely
Adjust Surround channel volume
control
Ensure+ and- connections are
connections
Ensure+ and- connections are
connections
Replace batteries Check are
correct Use closer Remove obstacle
Use correct button
10
Werbung
