Troubleshooting - auna AMP-CD608 Handbuch

TROUBLESHOOTING

Problem
The indicator is not lit and
there is no sound coming
from the speakers.
The indicator is lit but
there is no sound from the
speakers.
No sound from Centre
channel.
The stereo sound is
distorted (left / right
reversed, the sound
seems to come from a
distance).
The remote control does
not work properly.
Possible Cause
The mains plug is not
connected correctly.
The speakers are not
connected properly.
The volume control is set
to minimum.
The speaker connection is
disconnected.
The cable connection
of the input source is
interrupted.
Balance control is not set
correctly.
Polarity problem.
The battery is empty.
The battery is not inserted
correctly.
The remote control is too
far away from the unit.
Obstacles in the way
Wrong key pressed.
Suggested Solution
Check the cable and
connection.
Check the cable and
connection of the
speakers.
Use the volume control.
Check the cable and con-
nection of the speakers.
Check the cable connec-
tion of the input source.
Check the balance control
setting.
Check that the speakers
and input channels are
properly connected.
Connect (+) to (+) and (-)
to (-).
Replace the battery.
Insert the battery
correctly.
Reduce the distance.
Remove the obstacles.
Use the correct button.
EN
21